Available base materials: FR4, aluminum, FPC and copper
Copper thickness: 0.5oz (minimum)
Copper thickness: 4oz (maximum)
Board thickness: 0.2mm (minimum)
Board thickness: 3.2mm (maximum)
Surface finishes: HAL, ENIG, OSP, gold finger and chemistry tin
Possible solder mask colors: green, black, white, yellow and blue
Board dimension: 600 x 1,000mm
Hole diameter: 0.2mm (minimum)
Line width: 0.075mm (minimum)
Line spacing: 0.075mm (minimum)
SMT pitch: 30 degrees (minimum)
Annular ring: 0.05mm (minimum)
Aspect ratio: 11:01
Surface/hole plating tolerance:
Hole tolerance (PTH): 0.25mm
Hole tolerance (NPTH): 0.15mm
SM tolerance (LPI)
With electrical test
Certificate: RoHS
SMT device mounting is available
All trademarks shown here are for reference purposes only. They are the property of their respective owners, and we are not authorized to sell items bearing such trademarks.
Note: Not all certifying agents offer online lookup, and some have a lag time for posting new certificates. If you are unable to find a certificate online, contact the certification agency or supplier for further verification.
){kind=link}
){kind=link}
){kind=link}
){kind=link}